IBM SG24-4817-00 - Manual (Page 238)

This soft copy for use by IBM employees only.
::= { nbrEntry 2 }
nbrIpAddress2 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
One of the IP addresses of the ATM SNMP agent of the node
attached to the port/slot defined by this entry.
When not available, 0.0.0.0 is returned.
″
::= { nbrEntry 3 }
nbrAtmAddress OBJECT-TYPE
SYNTAX AtmAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The ATM identification of the node attached to the
port/slot defined by this entry.
When not available, a null string is returned.
″
::= { nbrEntry 4 }
nbrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The interface number of the adjacent node to which the
connection defined by this entry is attending.
When not available, 0 is returned.
″
::= { nbrEntry 5 }
nbrDescriptor OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The value of the MIB-II sysDescr as reported by the
device attached to this port.
When not available, a null string is returned.
″
::= { nbrEntry 6 }
nbrOid OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The value of the MIB-II sysOID as reported by the
device attached to this port.
When not available, a null string is returned.
″
::= { nbrEntry 7 }
nbrName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The value of the MIB-II sysName as reported by the
device attached to this port.
222
ATM Workgroup Solutions: Implementing the 8285 ATM Switch