IBM SG24-4817-00 - Manual (Page 239)

This soft copy for use by IBM employees only.
When not available, a null string is returned.
″
::= { nbrEntry 8 }
nbrLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The value of the MIB-II sysLocation as reported by the
device attached to this port.
When not available, a null string is returned.
″
::= { nbrEntry 9 }
trunkId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The internal identifier for this trunk.
Set to 0 if not a trunk.
″
::= { nbrEntry 10 }
-- TFTP
tftp OBJECT IDENTIFIER ::= { node 6 }
transferControl OBJECT-TYPE
SYNTAX INTEGER {
ready (1),
download (2),
upload (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
″
A file transfer is initiated through a start command.
″
::= { tftp 1 }
transferDate OBJECT-TYPE
SYNTAX DateAndTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The date and time of the last transfer.
″
::= { tftp 2 }
serverIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
″
The IP address of the server used for file transfer.
″
::= { tftp 3 }
fileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
ACCESS read-write
STATUS mandatory
Appendix E. IBM ATM Campus Switch Private MIBs
223