IBM SG24-4817-00 - Manual (Page 231)

This soft copy for use by IBM employees only.
″
The ifindexes of the five most receiving interfaces.
The first ifindex given is the one corresponding to
the interface which has received the more cells
during the last polling interval.
All ifIndexes are separated by a blank character.
If there are less than 5 interfaces receiving data,
there are less than 5 ifindexes listed.
″
::= { globalThroughputStats 3 }
transmitTopList OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The ifindexes of the five most transmitting interfaces.
The first ifindex given is the one corresponding to
the interface which has sent the more cells
during the last polling interval.
All ifIndexes are separated by a blank character.
If there are less than 5 interfaces transmitting data,
there are less than 5 ifindexes listed.
″
::= { globalThroughputStats 4 }
globalMaximumCellThroughput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The maximal number of cells that can be transmitted
through the switch in one second.
″
::= { globalThroughputStats 5 }
-- ATM optional features
optionalFeatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF OptionalFeatureEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″
This table provides the list of the optional ATM features
installed in the ATM subsystem.
″
::= { physical 6 }
optionalFeatureEntry OBJECT-TYPE
SYNTAX OptionalFeatureEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″
Entries of the optionalFeatureTable.
″
INDEX { optionalFeatureSlotIndex,
optionalFeatureSubslotIndex }
::= { optionalFeatureTable 1 }
OptionalFeatureEntry ::= SEQUENCE {
optionalFeatureSlotIndex
INTEGER,
optionalFeatureSubslotIndex
INTEGER,
Appendix E. IBM ATM Campus Switch Private MIBs
215