IBM SG24-4817-00 - Manual (Page 218)

This soft copy for use by IBM employees only.
SYNTAX INTEGER {
isolated (1),
attached (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The actual state of the slot connection to the switch.
When the administrative state is set to ISOLATE, the
operational state becomes ISOLATED.
When the operational state is set to ATTACH, the operational
state may become either ATTACHED or ISOLATED depending on
the hardware current status of the slot.
″
::= { switchEntry 3 }
-- ATM modules
moduleTable OBJECT-TYPE
SYNTAX SEQUENCE OF ModuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″
This table provides the list of ATM modules in the hub.
″
::= { physical 2}
moduleEntry OBJECT-TYPE
SYNTAX ModuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″
Entries of moduleTable.
″
INDEX { moduleSlotIndex }
::= { moduleTable 1 }
ModuleEntry ::= SEQUENCE {
moduleSlotIndex
INTEGER,
moduleType
INTEGER,
moduleDescription
DisplayString,
moduleSerialNumber
DisplayString,
moduleSoftwareVersion
DisplayString,
moduleHardwareVersion
INTEGER,
moduleAdminState
INTEGER,
moduleOperState
INTEGER,
moduleErrors
Counter,
moduleMaxVpc
INTEGER,
moduleUsedVpc
INTEGER,
202
ATM Workgroup Solutions: Implementing the 8285 ATM Switch