IBM SG24-4817-00 - Manual (Page 281)

This soft copy for use by IBM employees only.
slot/subslot is unoccupied, the timestamp indicates
the time that the module was removed.
If no module
has occupied this slot/subslot since the last
restart of the agent, the value of ssTimeLastChanged
for this entry is zero.
″
::= { ssLastChangedEntry 3 }
ssTimeLastChanged OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The value of SysUpTime at the time that the
last change was detected to any of the information
included in the summary table entry for this slot
and subslot.
A change in the value of this object
signals the management station to re-get the
corresponding summary information.
″
::= { ssLastChangedEntry 4 }
ssLastChangedSummary OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
This object contains the value of ssTimeLastChanged for
each slot/subslot in the concentrator. The first two
octets contain the version of this object. The data
following the version begins with the first slot and
all of its sub-slots before continuing with the next slot.
″
::= { staticSummary 3 }
--
-- IBM 8260 Power Group
--
-- This group is used for managing the
-- power in the IBM 8260 hub.
--
-- Hub power mode
--
ocPowerModeAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
fault-tolerant(1),
not-fault-tolerant(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
″
The current desired state of hub power fault-tolerant
mode. Setting this object to fault-tolerant(1) will
reserve one power supply
′
s worth of power from the power
budget for fault-tolerant operation, provided sufficient
power is available.
Setting this object to
not-fault-tolerant(2) returns the reserved power to the
power budget.
″
::= { ocPowerControl 1 }
Appendix E. IBM ATM Campus Switch Private MIBs
265