IBM SG24-4817-00 - Manual (Page 278)

This soft copy for use by IBM employees only.
of a slot/subslot. This information is a summary of
the objects in the modules branch.
No entry in this table exists for an empty slot.
″
::= { staticSummary 1 }
staticSummaryEntry OBJECT-TYPE
SYNTAX StaticSummaryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″
A predefined collection of MIB objects whose
values can be retrieved as a single field.
″
INDEX { ssSlotIndex, ssSubSlotIndex }
::= { staticSummaryTable 1 }
StaticSummaryEntry ::=
SEQUENCE {
ssSlotIndex INTEGER,
ssSubSlotIndex INTEGER,
ssValues OCTET STRING
}
ssSlotIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The slot number of the slot to which this
entry pertains.
″
::= { staticSummaryEntry 1 }
ssSubSlotIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The subslot number to which this entry pertains.
It is associated with a slot number. Motherboards are
always located in subslot one, (e.g. .1). However,
daughter cards can reside on any subslot within the range
(2 ... 8), (e.g. .<2 .. 8>).
″
::= { staticSummaryEntry 2 }
ssValues OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The OIDs and values of the objects to be summarized,
given as an octet string in the
′
New Summary
′
format.
NEW_SUMMARY DEFINITION ::= BEGIN
IMPORTS TimeTicks FROM RFC1155-SMI;
Message ::= CHOICE OF {
Message_0
}
262
ATM Workgroup Solutions: Implementing the 8285 ATM Switch