IBM SG24-4817-00 - Manual (Page 261)

This soft copy for use by IBM employees only.
DESCRIPTION
″
Error condition W as defined in the Q.2110
Specification.
This is the number of times that transmission
was not permitted by the peer entity due to
a lack of credit.
″
::= { atmSaalStatsEntry 10 }
atmSaalCreditObtained OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
Error condition X as defined in the Q.2110
Specification.
This is the number of times that credit was
obtained from the peer entity to allow
transmission.
″
::= { atmSaalStatsEntry 11 }
-- This MIB defines ATM support for Permanent Virtual Circuits.
atmPvc OBJECT IDENTIFIER ::= { node 10 }
-- Global PVC Parameter
atmPvcHandler OBJECT-TYPE
SYNTAX INTEGER {
ready (1),
out-of-memory (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The status of the PVC handler in the switch.
When no more memory is available, the creation of new PVCs
is rejected with a generic Error sense code.
″
::= { atmPvc 1 }
-- PVC Table
atmPvcTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmPvcEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″
This table lists all PVCs defined per interface.
There is only one entry in this table per PVC
(point-to-point or point-to-multipoint PVC).
″
::= { atmPvc 2 }
atmPvcEntry OBJECT-TYPE
SYNTAX AtmPvcEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″
Entries of atmPvcTable.
Appendix E. IBM ATM Campus Switch Private MIBs
245