IBM SG24-4817-00 - Manual (Page 266)

This soft copy for use by IBM employees only.
PVC is defined as point-to-point in the PVC table.
″
INDEX { atmPvcEpIndex,
atmPvcEpIdentifier,
atmPvcEpParty }
::= { atmPvcEpTable 1 }
AtmPvcEpEntry ::= SEQUENCE {
atmPvcEpIndex
INTEGER,
atmPvcEpIdentifier
INTEGER,
atmPvcEpParty
INTEGER,
atmPvcEpRowStatus
RowStatus,
atmPvcEpStatusCause
INTEGER,
atmPvcEpRemAddress
NetPrefix,
atmPvcEpRemIndex
INTEGER,
atmPvcEpRemVpi
INTEGER,
atmPvcEpRemVci
INTEGER,
atmPvcEpLastActive
DateAndTime,
atmPvcEpQ2931Cause
INTEGER,
atmPvcEpFailures
Counter }
atmPvcEpIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The ifIndex value of the ATM interface used by this PVC.
″
::= { atmPvcEpEntry 1 }
atmPvcEpIdentifier OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
A value used to uniquely identify this PVC on this
interface.
This is the same identifier as the one used in the atmPvcTable
to identify the PVC that this end-point belongs to.
″
::= { atmPvcEpEntry 2 }
atmPvcEpParty OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
A value used to uniquely identify a remote end-point of a PVC,
when associated with an interface index and a PVC identifier.
250
ATM Workgroup Solutions: Implementing the 8285 ATM Switch