IBM SG24-4817-00 - Manual (Page 260)

This soft copy for use by IBM employees only.
DESCRIPTION
″
Error conditions A to M, as defined in the Q.2110
Specification.
This is the number of received unsolicited or
or inappropriate PDUs.
″
::= { atmSaalStatsEntry 4 }
atmSaalUnsuccessPdus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
Error condition O as defined in the Q.2110
Specification.
This is the number of failing retries.
″
::= { atmSaalStatsEntry 5 }
atmSaalFailedEstablishment OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
Error condition P as defined in the Q.2110
Specification.
This is the number of failing polls.
″
::= { atmSaalStatsEntry 6 }
atmSaalSequenceGap OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The number of times sequence gaps were
detected by the peer entity.
″
::= { atmSaalStatsEntry 7 }
atmSaalGapNumbers OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The number of times frames were
re-transmitted due to sequence gaps
detected by the peer entity.
″
::= { atmSaalStatsEntry 8 }
atmSaalOtherListErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
Error conditions Q to V as defined in the
Q.2110 Specification.
″
::= { atmSaalStatsEntry 9 }
atmSaalLackOfCredit OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
244
ATM Workgroup Solutions: Implementing the 8285 ATM Switch