IBM SG24-4817-00 - Manual (Page 259)

This soft copy for use by IBM employees only.
atmSaalStatsSiVpi
INTEGER,
atmSaalStatsSiVci
INTEGER,
atmSaalUnexpectPdus
Counter,
atmSaalUnsuccessPdus
Counter,
atmSaalFailedEstablishment
Counter,
atmSaalSequenceGap
Counter,
atmSaalGapNumbers
Counter,
atmSaalOtherListErrors
Counter,
atmSaalLackOfCredit
Counter,
atmSaalCreditObtained
Counter }
atmSaalStatsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The ifIndex value of the ATM interface which, with the
signalling channel defined by its Vpi/Vci values,
uniquely identifies this entry.
″
::= { atmSaalStatsEntry 1 }
atmSaalStatsSiVpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The Vpi value which, with the Vci value specified in
atmSaalStatsSiVci, defines the signalling channel for this
entry.
Usually, there is one signalling channel per interface
defined by Vpi=0,Vci=5.
″
::= { atmSaalStatsEntry 2 }
atmSaalStatsSiVci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The Vci value which, with the Vpi value specified in
atmSaalStatsSiVpi, defines the signalling channel for this
entry.
Usually, there is one signalling channel per interface
defined by Vpi=0,Vci=5.
″
::= { atmSaalStatsEntry 3 }
atmSaalUnexpectPdus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
Appendix E. IBM ATM Campus Switch Private MIBs
243