IBM SG24-4817-00 - Manual (Page 253)

This soft copy for use by IBM employees only.
AtmSvcLogEntry ::= SEQUENCE {
atmSvcLogIndex
INTEGER,
atmSvcLogInterfaceIndex
INTEGER,
atmSvcLogCallingNumber
AtmAddress,
atmSvcLogCalledNumber
AtmAddress,
atmSvcLogCreationTime
DateAndTime,
atmSvcLogTime
DateAndTime,
atmSvcLogClearCause
INTEGER,
atmSvcLogForwardQOS
INTEGER,
atmSvcLogBackwardQOS
INTEGER,
atmSvcLogForwardBW
INTEGER,
atmSvcLogBackwardBW
INTEGER }
atmSvcLogIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
An identification value for this entry, assigned by the
local SNMP agent.
This value is assigned for each new SVC call or
add-party request.
This index is allocated in a decreasing order, so that
a get-next request on the table allows to retrieve the
latest calls first.
″
::= { atmSvcLogEntry 1 }
atmSvcLogInterfaceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The ifIndex value of the ATM interface used by this
SVC.
″
::= { atmSvcLogEntry 2 }
atmSvcLogCallingNumber OBJECT-TYPE
SYNTAX AtmAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The calling number carried in the calling party number
information element of the call set-up message.
″
::= { atmSvcLogEntry 3 }
atmSvcLogCalledNumber OBJECT-TYPE
SYNTAX AtmAddress
ACCESS read-only
Appendix E. IBM ATM Campus Switch Private MIBs
237