IBM SG24-4817-00 - Manual (Page 252)

This soft copy for use by IBM employees only.
atmSvcVci OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The VCI value used by this SVC for this interface.
″
::= { atmSvcEntry 11}
-- This table keeps track of all SVCs that have been cleared.
-- It allows to build traffic mattrix and provide more in-depth.
-- statistics level on the use of the network.
-- It is optional.
atmSvcLogSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The maximum number of entries supported by this local
SNMP agent.
When this value is exceeded, the entries are wrapped.
″
::= { atmQ2931 4 }
atmSvcLogLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
″
The maximum number of entries that can be written in the
atmSvcLogTable before a trap is generated.
When this number is reached, an svcLogOverflow trap is
generated.
When set to 0, no trap is generated.
″
::= { atmQ2931 5 }
atmSvcLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmSvcLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″
This table contains a list of the latest Switched
Virtual Connection (SVC) that were completed on this
ATM node.
An SVC is completed when it has been torn down at the
originator
′
s request (normal completion) or by the
network operator (forced tear down), or when it has
been rejected or cleared by the network (exceptional
condition).
″
::= { atmQ2931 6 }
atmSvcLogEntry OBJECT-TYPE
SYNTAX AtmSvcLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″
Entries of atmSvcLogTable.
″
INDEX { atmSvcLogIndex }
::= { atmSvcLogTable 1 }
236
ATM Workgroup Solutions: Implementing the 8285 ATM Switch