IBM SG24-4817-00 - Manual (Page 248)

This soft copy for use by IBM employees only.
atmQ2931StatsVpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The Vpi value which, with the Vci value specified in
atmQ2931StatsVci, defines the signalling channel for this
entry.
Usually, there is one signalling channel per interface
defined by Vpi=0,Vci=5.
″
::= { atmQ2931StatsEntry 2 }
atmQ2931StatsVci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The Vci value which, with the Vpi value specified in
atmQ2931StatsVpi, defines the signalling channel for this
entry.
Usually, there is one signalling channel per interface
defined by Vpi=0,Vci=5.
″
::= { atmQ2931StatsEntry 3 }
atmQ2931OutCallAttempts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
This is the number of outgoing call attempts on this
interface, including accepted as well as rejected calls.
″
::= { atmQ2931StatsEntry 4 }
atmQ2931OutCallInProgress OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
This is the current number of outgoing calls in progress
on this interface.
″
::= { atmQ2931StatsEntry 5 }
atmQ2931OutCallFailures OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
This is the number of outgoing calls that were cleared
for a reason other than a DTE or operator initiated action.
″
::= { atmQ2931StatsEntry 6 }
atmQ2931InCallAttempts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
This is the number of incoming call attempts on this
interface, including accepted as well as rejected calls.
″
::= { atmQ2931StatsEntry 7 }
232
ATM Workgroup Solutions: Implementing the 8285 ATM Switch