GarrettCom Magnum MNS-6K - Manual (Page 63)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Magnum 6K25#
ipconfig ?
ipconfig : Configures the system IP address, subnet mask and gateway
Usage
ipconfig [ip=] [mask=] [dgw=]
Magnum 6K25#
ipconfig ip=fe80::220:6ff:fe25:ed80 mask=ffff:ffff:ffff:ffff::
Action Parameter Missing. "add" assumed.
IPv6 Parameters Set.
Magnum 6K25#
show ipv6
IPv6 Address : fe80::220:6ff:fe25:ed80 mask : ffff:ffff:ffff:ffff::
Magnum 6K25#
show ipconfig
IP Address
: 192.168.5.5
Subnet Mask : 255.255.255.0
Gateway Address : 192.168.5.1
IPv6 Address
: fe80::220:6ff:fe25:ed80 mask : ffff:ffff:ffff:ffff::
IPv6 Gateway : ::
Magnum 6K25#
F
IGURE
42 – Configuring IPv6
In addition to the commands listed above, the commands which support IPv6 addressing are
Syntax ftp - ftp to an IPv6 station
Example – ftp fe80::220:6ff:fe25:ed80
Syntax telnet - telnet to an IPv6 station
Example – telnet fe80::220:6ff:fe25:ed80
Besides, if the end station supports IPv6 addressing (as most Linux and Windows systems do),
one can access the switch using the IPv6 addressing as shown in the example below
http://fe80::220:6ff:fe25:ed80
List of commands in this chapter
Syntax ipconfig [ip=] [mask=] [dgw=]
[add|del] – configure and IPv6 address. The add/delete option can be used to add or delete
IPv4/IPv6 addresses
Syntax show ipconfig – display the IP configuration information – including IPv6 address
62