GarrettCom Magnum MNS-6K - Manual (Page 296)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Command Description
start vlan= activate the VLAN configuration
static vlan=
convert a dynamic VLAN to a static VLAN
statistics def-owner= def-
comm=
define the RMON statistics group and the
community string associated with the group
stp STP Configuration mode
stp Start (Enable) or stop (Disable) STP
sync [hour=<0-24>] [min=<0-59>] setup the frequency at which the SNTP server is
queried
tacplus [
order=]
enable or disable TACACS authentication,
specifying the order in which the server or local
database is looked up where “tac,local” implies,
first the TACAS+ server, then local logins on
the device
tacserver id=
[ip=] [port=port>]
[encrypt=]
[key=]
[mgrlevel=]
[oprlevel=]
adds a list of up to five TACACS+ servers
where
– [mandatory] adds or
delete a TACACS+ server.
id= – [mandatory] the order in
which the TACACS+ servers should be
polled for authenticaton
[ip=] – [mandatory for add]
the IP address of the TACACS+ server
[port=] – [optional for add]
TCP port number on which the server is
listening
[encrypt=] –
[optional for add] enable or disable packet
encryption
[key=] – [optional for add,
mandatory with encrypt] when encryption
is enabled, the secret shared key string
must be supplied
[mgrlevel=] and
[oprlevel=] – [optional] specifies
the manager and operator level as defined
on the TACACS+ server for the
respective level of login
telnet enable or disable telnet sessions
telnet [port=number>] telnet from the switch. The IP address can be an
IPv4 address or an IPv6 address
295