GarrettCom Magnum MNS-6K User Manual
Page 225

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E 
 
 SNMP MANAGERS INFO 
 ------------------ 
 
 SNMP TRAP STATIONS INFO 
 ----------------------- 
 
Magnum6K25# 
snmp
Magnum6K25(snmp)##
community write=private read=public
 
 SNMP Read community name successfully set 
 
 SNMP Write community name successfully set 
 
Magnum6K25(snmp)##
show snmp
 
 SNMP CONFIGURATION INFORMATION 
 ------------------------------ 
 SNMP Get Community Name : public 
 SNMP Set Community Name : private 
 SNMP Trap Community Name : public 
 AuthenTrapsEnableFlag : enabled 
 SNMP Access Status : enabled 
 
 SNMP MANAGERS INFO 
 ------------------ 
 
 SNMP TRAP STATIONS INFO 
 ----------------------- 
 
Magnum6K25(snmp)## 
mgrip add ip=192.168.1.111
 
 Manager IP Address added successfully 
 
Magnum6K25(snmp)## 
mgrip add ip=192.168.1.222
 
 Manager IP Address added successfully 
 
Magnum6K25(snmp)# 
show snmp
 SNMP CONFIGURATION INFORMATION 
 ------------------------------ 
 SNMP Get Community Name : public 
 SNMP Set Community Name : private 
 SNMP Trap Community Name : public 
 AuthenTrapsEnableFlag : disabled 
 SNMP Access Status : enabled 
 
 SNMP MANAGERS INFO 
 ------------------ 
 IP Address = 192.168.1.111 
 IP Address = 192.168.1.222 
 
Managers added are displayed under the
SNMP information by using the “show 
snmp” command 
Use this command for SNMP v1 managers.
Without this command SNMP v1 managers 
will not be able to manage the switches. Not 
needed for SNMP v3. Note – maximum of 
5 stations allowed. 
224
