GarrettCom Magnum MNS-6K - Manual (Page 218)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
217
List of commands in this chapter
Syntax
show gvrp - shows whether GVRP is disabled, along with the current settings for the maximum
number of VLANs and the current Primary VLAN
Syntax
gvrp > - enable or disable GVRP
Syntax
show-vlan – list all the VLANs (including dynamic VLANs) on the switch
Syntax set-ports port= state= - set the state of the port
to learn, block or disable for GVRP. Note the default state is disable
Syntax static vlan= - convert a dynamic VLAN to a static VLAN
Syntax set-forbid vlan= forbid= - sets the forbid GVRP
capability on the ports specified
Syntax show-forbid – display the ports with GVRP forbid capabilities