GarrettCom Magnum MNS-6K User Manual
Page 206
M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Syntax set-qi interval=
messages. These messages are sent to ask for group membership information. This is sent to the all-
system multicast group address, 224.0.0.1. The default value is 125 seconds. The valid range can be
from 60 to 127 seconds.
Syntax set-qri interval=
can elapse between when the querier router sends a host-query message and when it receives a response
from a host. The Default value is 10 seconds. The Range can be from 2 to 270 seconds. Restrictions
apply to the maximum value because of an internal calculation that is dependent on the value of the
Query Interval.
Magnum6K25#
igmp
Magnum6K25(igmp)##
set-port port=10-12 mode=forward
Port mode is set.
Magnum6K25(igmp)##
set-port port=14-16 mode=block
Port mode is set.
Magnum6K25(igmp)##
show-port
-----------------------------------
Port | Mode
-----------------------------------
09
Auto
10
Forwarding
11
Forwarding
12
Forwarding
13
Auto
14
Blocking
15
Blocking
16
Blocking
Magnum6K25(igmp)##
show-router
RouterIp PortNo Timer
--------------------------------------
10.21.1.250 9 25
Magnum6K25(igmp)##
set-leave enable
IGMP immediate leave status is enabled
Magnum6K25(igmp)##
show igmp
IGMP State
: Enabled
ImmediateLeave
: Enabled
Querier
: Enabled
205