GarrettCom Magnum MNS-6K - Manual (Page 44)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Date and time
It may be necessary to set the day, time or the time zone manually. This can be done by
using the ‘set’ command with the necessary date and time options. These are listed below:
Syntax set timezone GMT=[+ or -] hour=<0-14> min=<0-59>
Syntax set date year=<2001-2035> month=<1-12> day=<1-31>
[format=]
Syntax set time hour=<0-23> min=<0-59> sec=<0-59> [zone=GMT[+/-]hh:mm]
Thus to set the time to be 08:10 am in the -8 hours from GMT (PST or time zone on west
coast of USA) and to set the date to be 15 October 2003, the following set of commands
are used.
Magnum6K25#
set time hour=8 min=30 sec=0 zone=GMT-8:00
success in setting device time
Magnum6K25#
show time
Time : 8:30:04
Magnum6K25#
show timezone
Timezone : GMT-08hours:00minutes
Magnum6K25#
set date year=2003 month=10 day=15
Success in setting device date
Magnum6K25#
show date
System Date : Wednesday 10-15-2003 (in mm-dd-yyyy format)
Magnum6K25#
F
IGURE
29 - Setting the system date, time and time zone
Rebooting the switch resets the time to the default. Synchronizing with the time server
resets the time. Other relevant date and time commands are:
Syntax set timeformat format=<12|24>
Syntax set daylight country=< country name>
Magnum6K25#
set daylight ?
set daylight : Sets the day light location
Usage
set daylight country=
Magnum6K25#
set daylight country=USA
Success in setting daylight savings to the given location/country USA
Magnum6K25#
show daylight
43