GarrettCom Magnum MNS-6K - Manual (Page 55)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
tacacs TACACS+ settings
auth 802.1x Settings
igmp IGMP Settings
smtp SMTP settings
If the module name is not specified the whole configuration is erased.
For example, ‘kill config save=system’ preserves the system IP address, netmask and
default gateway.
Magnum6K25#
kill config save=system
Do you want to erase the configuration? [ 'Y' or 'N']
Y
Successfully erased configuration...Please reboot.
F IGURE 40 – Erasing configuration without erasing the IP address
Once the configuration is erased, please reboot the switch for the changes to take effect.
Displaying Serial Number
To display the serial number of the unit, use the command “show setup” as shown below. The
command also displays other information related to the switch.
Syntax show setup – display the setup, serial number, factory code information and more
Magnum 6K25#
show setup
Version
: Magnum 6K25 build 3.7.1 Sep 27 2007 16:41:37
MAC Address : 00:20:08:03:05:09
IP Address : 192.168.5.5
Subnet Mask : 255.255.255.0
Gateway Address : 192.168.5.1
CLI Mode : Manager
System Name : Magnum 6K25
System Description : 25 Port Modular Ethernet Switch
System Contact : [email protected]
System Location : Fremont, CA
System ObjectId : 1.3.6.1.4.1.553.12.6
System Seriial No. : 43576812
Original Factory Config Code : 6K25-8TP
Magnum 6K25#
F IGURE 41 – Display the serial number, factory code and other relevant setup information
54