GarrettCom Magnum MNS-6K - Manual (Page 51)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
computed and stored in the file will not be matched. Should you want to edit, edit the System portion
of the file only. GarrettCom recommends editing the “script” file (see below)
Note 2 – File names cannot have special characters such as *#!@$^&* space and control characters.
To ease the process of uploading and executing a series of commands, the MNS-6K
commands are:
Syntax host name= [ip=] [user=]
[pass=] – create a host entry for accessing host. This is equivalent
to creating a host table on many systems. Maximum of 10 such entries are
allowed
Syntax show host – displays the host table entries
Magnum6K25#
access
Magnum6K25(access)##
host
Usage
host name= [ip=] [user=] [pass=]
Magnum6K25(access)##
host add name=server ip=192.168.5.2
Host added successfully
Magnum6K25(access)##
show host
No Host Name IP Address User Password
====================================================================
1
server 192.168.5.2 -- ******
2 -- -- -- --
3 -- -- -- --
4 -- -- -- --
5 -- -- -- --
6 -- -- -- --
7 -- -- -- --
8 -- -- -- --
9 -- -- -- --
10 -- -- -- --
Magnum 6K25(access)##
F
IGURE
36 – Creating host entries on MNS-6K
Displaying configuration
To display the configuration or to view specific modules configured, the ‘show config’ command is
used as described below.
Syntax show config [module=]
50