GarrettCom Magnum MNS-6K User Manual

Page 281

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E

Command

Description

clear command to clear various aspects of the
MNS-6K information – most notably “clear
addr” – clears the addresses learnt or “clear log”
to clear the logs (and the type of logs)

clear logs or specific type of logs

climode

set the interactive CLI mode on (console) or off
(script). To see the mode – use the show option

com2sec id=
[secname=] [source=]
[community=]

a part of the View based Access control model
(VACM) as defined in RFC 2275. This
specifies the mapping from a source/community
pair to a security name. On MNS-6K, up to 10
entries can be specified

command

options for a command

community [write=]
[read=] [trap=community>]

set the necessary community strings

configure access

sets the access parameters e.g. disable telnet
session

cost port=
value=<0-65535>

cost is specific to a port and the port(s) have to
be specified

configure port-security

sets the port authorization based on MAC
addresses

configure vlan type=port

enter the VLAN configuration commands

cost port=
value=<0-65535>

cost is specific to a port and the port(s) have to
be specified

deftrap community=

defines the default community string to be used
when sending traps. When user does not specify
the trap community name when setting a trap
station using the “trap” command, the default
trap community name is used

280