GarrettCom Magnum MNS-6K User Manual
Page 292
M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Command
Description
set-untag port=
priority=
The 802.1p user priority assigned to untagged
received packets to be transmitted as tagged from
the priority queue
setvar
[sysname|syscontact|syslocation]=
set the system name, contact and location
information
setvar
[sysname|syscontact|syslocation]=
sets the system name, contact and location. All
parameters are optional but a user must supply
at least one parameter
set-weight weight=<0-7>
sets the port priority weight for All the ports.
Once the weight is set, all the ports will be the
same weight across the switch. The valid value
for weight is 0-7
show address-table
displays which mac address is associated with
which port for packet switching
show active-stp
status whether STP or RSTP is running
Show active-snmp
display the version of SNMP currently in use
show alarm
displays the current status of Alarm system
show auth
show the 802.1x configuration or port status
show backpressure
display backpressure buffers
show config
show setup parameters configured
show console
displays the console settings
show date
displays the date
show dualhome
Display dual-homing status
show flowcontrol
display flow control buffers
show ftp
display the current ftp operation mode
show gvrp
shows whether GVRP is disabled, along with
the current settings for the maximum number of
VLANs and the current Primary VLAN
show history
show the last 25 commands executed – if less
than 25 commands are executed, only those
commands executed are shown
291