GarrettCom Magnum MNS-6K - Manual (Page 284)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Command Description
group id=
[groupname=]
[model=]
[com2secid=] a part of the View based Access control model
(VACM) as defined in RFC 2275. This
command defines the mapping from sec model or
a sec name to a group. A sec model is one of v1,
v2c, or usm. On MNS-6K, up to 10 entries can
be specified
gvrp > enable or disable GVRP
host name=
[ip=] [user=]
[pass=]
create a host entry for accessing host.
This is equivalent to creating a host
table on many systems. Maximum of 10
such entries are allowed
help help for a specific command
history def-owner= def-
comm= define the RMON history group and the
community string associated with the group
igmp IGMP configuration mode
igmp enable or disable IGMP on the switch
ipconfig [ip=]
[mask=]
[dgw=] to set IP address on the switch
kill config [save=system] resets the system configuration. The
module_name option does not reset the specific
module parameters. The modules are system,
event, port, bridge, stp, ps, mirror, sntp, vlan,
gvrp and snmp
kill session id= terminate a telnet session. See also “show session”
lacp
enable the LACP configuration module within
CLI
lacp
enable or disable LACP
learn port=
learn MAC addresses connected to the
Magnum 6K switch
283