GarrettCom Magnum MNS-6K - Manual (Page 58)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Syntax tftp [type=]
[host=] [ip=] [file=] – upload and download
information using tftp command
Where
- different tftp operations – get a file from the server or put the information
on the server
[type=] – optional type field. This is useful
to specify whether a log file or host file is uploaded or downloaded. This can also
perform the task of exporting a configuration file or uploading a new image to the
switch
[host=] [ip=] [file=] – parameters associated
with tftp server for proper communications with the server
Syntax xmodem [type=] – upload and
download information using xmodem command and console connection
Where
- different xmodem file transfer operations – get a file from the server or put
the information on the server
[type=] – optional type field. This is useful
to specify whether a log file or host file is uploaded or downloaded. This can also
perform the task of exporting a configuration file or uploading a new image to the
switch
Syntax host name= [ip=] [user=]
[pass=] – create a host entry for accessing host. This is equivalent to
creating a host table on many systems. Maximum of 10 such entries are allowed
Syntax show host – displays the host table entries
Syntax climode - set the interactive CLI mode on (console) or off
(script). To see the mode – use the show option
Syntax more - enable or disable the scrolling of lines one page at a time
Syntax show config [module=] – displays the configuration
Other commands
Syntax configure access – sets the access parameters (e.g. disable telnet session)
57