GarrettCom Magnum MNS-6K - Manual (Page 267)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Syntax broadcast-protect - protect switch from broadcast storms
Syntax rate-threshold port= rate= - change the allowed broadcast
rate threshold
Chapter 9 - VLAN
Syntax set vlan type= defines the VLAN type
Syntax configure vlan type=port enter the VLAN configuration commands
Syntax vlan type=port enter the VLAN configuration commands
Syntax add id= [name=] port=
[forbid=] [] - adding VLAN
Syntax edit id= [name=] port=
[] - edit existing VLAN name
Syntax start vlan= activate the VLAN configuration
Syntax save save the configuration (including the VLAN configuration)
Syntax show vlan type= [] display specific VLAN information
Syntax set-port port= default id= sets the default VLAN id.
For Magnum 6K family of switches, the default VLAN id is 1, unless changed using this command
Syntax set-port port= filter status= enables or disables
the VLAN filtering function.
Syntax set-port port= tagging id= status=
untagged> defines whether the outgoing packets from a port will be tagged or untagged.
Syntax set-port port= join id= adds the specified port(s) to the
specified VLAN id
Syntax set-port port= leave id= releases a specific port from a
VLAN
Syntax show-port [port=] shows all parameters related to tag vlan for the list of ports.
If the port parameter is omitted, it will display all ports
266