GarrettCom Magnum MNS-6K - Manual (Page 271)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Chapter 13 – Dual-Homing
Syntax dualhome – enter the dual-homing configuration sub-system
Syntax dualhome – enable or disable dual-homing
Syntax dualhome add port1= port2= – dual-homing setup similar to that of
unmanaged switches such as ESD42
OR
Syntax dualhome add primary= secondary= – dual-homing setup as primary-
secondary mode
Syntax dualhome del – Delete the dual-homing setup
Syntax show dualhome – Display dual-homing status
Chapter 14 – Link Aggregation
Control Protocol (LACP)
Syntax lacp - enable the LACP configuration module within CLI
Syntax lacp - enable or disable LACP
Syntax
add port= [priority=<0-65535>] – add the specified list of ports to
form the logical LACP trunk. Default value for priority is 32768. The lower the value assigned to
priority, the higher the priority. The port with the highest priority is the primary port (over which certain
types of traffic like IGMP is transmitted)
Syntax
del port= - delete specified ports from the LACP membership
Syntax
edit port= [priority=] - edit the membership of the ports
specified. The priority can be from 0 – 65535
Syntax show lacp –
displays the status and other relevant LACP information
Chapter 15 – Quality of Service
Syntax qos – enter the QoS configuration mode
270