GarrettCom Magnum MNS-6K - Manual (Page 145)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
-------------------------------------------------------------------------------------------------------------------
Port# Type Priority Path Cost State
Des. Bridge Des. Port
-------------------------------------------------------------------------------------------------------------------
09 TP(10/100) 128 2000000 Forwarding 00:00:00:20:06:25:ed:89 00:09
10 TP(10/100) 128 2000000 Disabled
00:0a
11 TP(10/100) 128 2000000 Disabled 00:0b
12 TP(10/100) 128 2000000 Disabled 00:0c
13 TP(10/100) 128 200000 Forwarding 00:00:00:20:06:25:ed:89 00:0d
14 TP(10/100) 128 2000000 Disabled
00:0e
15 TP(10/100) 128 2000000 Disabled 00:0f
16 TP(10/100) 128 2000000 Disabled 00:10
Magnum6K25(rstp)##
forceversion rstp
Error: Force Version already set to Normal RSTP
Magnum6K25(rstp)##
forceversion stp
Magnum6K25(rstp)##
show-forceversion
Force Version : Force to STP only
Magnum6K25(rstp)##
show stp config
RSTP CONFIGURATION
-----------------
Rapid STP/STP Enabled(Global)
: YES
RSTP/STP Enabled Ports : 9,10,11,12,13,14,15,16
Protocol : Force to STP only
Bridge ID : 00:00:00:20:06:25:ed:89
Bridge Priority : 0
Bridge Forward Delay : 15
Bridge Hello Time : 02
Bridge Max Age : 20
Root Port : 0
Root Path Cost : 0
Designated Root : 00:00:00:20:06:25:ed:89
Designated Root Priority : 0
Root Bridge Forward Delay : 15
Root Bridge Hello Time : 02
Root Bridge Max Age : 20
Topology Change count : 0
Time Since topology Chg : 100
Magnum6K25(rstp)##
forceversion rstp
Magnum6K25(rstp)##
show-forceversion
Force Version : Normal RSTP
Magnum6K25(rstp)##
show stp config
RSTP CONFIGURATION
Using forceversion the switch is now operating using RSTP.
Note the “show stp config” command also indicates the switch
protocol is RSTP.
“forceversion” can be used for compatibility with STP
devices. In this example, the switch is forced to STP
mode.
144