GarrettCom Magnum MNS-6K - Manual (Page 308)

U P D A T I N G M N S - 6 K – S T E P 1
307
F IGURE 144 – Use the copy command to copy the files to the proper location
6) Make sure you remember where the files are stored as these files will be needed for the
next step.
Next steps
1) Access the GarrettCom Magnum 6K switch. The access can be over the console port
using the null modem cable or through the network using telnet. This is described in
step 2.
2) Save the existing configuration (either through the serial port or through the network
– depending on the access method). This is also described in step 2.
3) Load the updated MNS-6K software and reboot the switch. This is described in step
3.
4) (Optional step) Reload the saved configuration. This is described in step 4.