GarrettCom Magnum MNS-6K - Manual (Page 247)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Baud Rate : 38400
Data : 8
Parity
: No Parity
Stop : 1
Flow Control : None
Magnum6K25#
show history
1 : show version
2 : show setup
3 : show serial
4 : show history
Magnum6K25#
!1
show version
MNS-6K Ver: 3.6 Date:Oct 20 2006 Time:17:22:35 Build ID 1161390154
Magnum6K25#
F
IGURE
134 – History commands
Prompt
Setting a meaningful host prompt can be useful when a network administrator is managing
multiple switches and has multiple telnet or console sessions open at the same time. To facilitate
this, MNS-6K allows administrators to define custom prompts. The command to set a prompt is
Syntax set prompt
The length of the prompt is limited to 60 characters
There are predefined variables which can be used to set the prompt. These are
$n : System Name
$c : System Contact
$l : System Location
$i : System IP
$m : System MAC
$v : Version
$$ : $ Character
$r : New Line
$b : Space
A few examples on how the system prompt can be setup is shown below.
246