Barco PDS-4K HDMI Presentation Switcher - Manual (Page 99)

99 R5912621 /01 PDS–4K
Multiviewer: Test Pattern: Output Raster Box
Use Output Raster Box to turn On and to turn Off a border box around the multiviewer output. The output box
is white.
1. Scroll to and select Output Raster Box from the Test Pattern menu.
Image 6–138 Test Pattern: Output Raster Box selection
Once Output Raster Box is selected, the highlight bar turns from gray to cyan.
Image 6–139 Test Pattern: Output Raster Box adjustment
2. Use the Adjust knob to toggle the output raster box between Off and On.
Multiviewer: Test Pattern: Diagonal Motion
Use Diagonal Motion to add motion to a test pattern. In most cases the motion is diagonal; in some cases the
motion is either horizontal or vertical.
1. Scroll to and select Diagonal Motion from the Test Pattern menu.
Menu orientation