Barco PDS-4K HDMI Presentation Switcher - Manual (Page 25)

25 R5912621 /01 PDS–4K
2. Logo / Matte button, top and bottom row
- Use this button to select the Logo or Matte color for the output that is assigned to the source buttons in
the top/bottom row.
- This button places a Logo/Matte in PVW when “Auto Take” is turned off.
- This button transitions a Logo/Matte to PGM when “Auto Take is turned on.
3. Freeze button, top and bottom row
- Operates based upon the user setting in the System> Operation Setup> Front Panel Setup> Freeze
Menu.
◦
PGM : Freezes the active source on PGM for the output assigned to top or bottom row.
◦ PVW : Freezes the active source that is in PVW and awaits the operator to transition the frozen
source to PGM.
◦ Off : Disables the Freeze buttons.
- To thaw a frozen image on PGM, press the same source button and transition it to PGM.
4. Take button, top and bottom row
- Use this button to transition the source in PVW to PGM for the output assigned in the top/bottom row.
- Set the duration of the transition in the Output Menu/Trans Time.
- When “Auto Take” is turned on, this button is disabled, but it still indicates that a transition is taking
place by shifting from dim red to bright amber during the transition.
Preset/Cue mode
The following are descriptions of the front-panel control features in Preset/Cue mode .
1. Source buttons (1–10), top and bottom row
- Map the top-row and bottom-row source buttons to presets or cues.
- Each button either recalls a preset or selects a cue when “Auto Take” is turned off.
◦
Press the top-row Take button to either transition the preset to PGM or start the cue.
- Each button immediately either recalls a preset and transitions or starts a cue when "Auto Take" is
turned on.
◦
The top-row Take button pauses or resumes a running cue, as does the Play/Pause button on an
EC-210 controller.
◦ The bottom-row Take button stops a running cue, as does the Stop button on an EC controller.
- The current recalled preset or selected cue is indicated by a bright white button (presets) or a bright
cyan button (cues). After a preset has transitioned to PGM or a cue has stopped, the button returns to
dim white or cyan.
2. Logo / Matte button, top and bottom row
- Press the top-row Logo / Matte button to take a Logo or Matte color directly to PGM for all outputs.
- Press the bottom-row Logo / Matte button to place a Logo or Matte color into PVW for all outputs, then
press the top-row Take button to transition the Logo or Matte color to PGM for all outputs.
3. Freeze button, top and bottom row
- The Freeze buttons act as global freeze buttons, affecting all PGM outputs.
- Top-row and bottom-row Freeze buttons have the same function; they freeze or thaw all layers on
PGM.
4. Take button, top row
When a preset or cue is recalled/pending the top-row Take button is lit bright amber to indicate it should be
pressed to transition the preset to PGM or start the cue.
-
Press the top-row Take button to transition the preset to PGM or start the cue.
The button is dim amber until the preset has finished transitioning, or the cue has ended at which time
the button's light will be off.
- Press the top-row Take button while a cue is playing to pause the cue, just like the Play/Pause button
on EC-210.
When a cue is paused the button is lit bright amber.
- Press the top-row Take button while the cue is paused to resume the cue.
When a cue is resumed the button is lit dim amber.
5. Take button, bottom row
- Use the bottom-row Take button to Stop a cue, just like the Stop button on an EC controller.
◦ While a cue is running the button is lit dim amber.
◦ After the button is pressed to stop a cue, the button light is turned off, and the source button for the
cue returns to dim cyan.
Hardware Orientation