Operation setup: auto take – Barco PDS-4K HDMI Presentation Switcher User Manual
Page 149
149
R5912621 /01 PDS–4K
4. To recall the selected Preset, scroll to and select
Recall Selected
.
Image 6–244 Presets: Recall Selected
5. To delete the currently selected Preset, scroll to and select
Delete Selected
. A pop-up will ask for
confirmation. Deletion will be confirmed by a momentary pop-up message.
Image 6–245 Presets: Delete Selected
6. To return to the Operation Setup menu, scroll to and select
Back
.
Operation Setup: Auto Take
In Full Screen mode, the top row and bottom row buttons each control a separate screen or group of screens.
When “Auto Take” is off, selecting a source places that source in PVW for the assigned output. When “Auto
Take” is on, selecting a source transitions that source immediately to PGM for the assigned output. Full
Screen mode is the default operational mode for the front panel.
1. Scroll to and select
Auto Take
on the Operation Setup menu.