Usb backup/restore – Barco PDS-4K HDMI Presentation Switcher User Manual
Page 157
157
R5912621 /01 PDS–4K
Image 6–261 Set Static IP: Set IP Address adjustment
3. Turn the Adjust knob to adjust the first portion of the IP address, and press the Adjust knob when the
desired number is reached.
4. Repeat Step 3 for each portion of the IP address.
The
Subnet Mask
and the
Gateway Address
may be set in the same manner as the
IP Address
is set.
Back
returns to the Ethernet menu.
Back
again returns to the System menu.
USB Backup/Restore
Use System: USB Backup/Restore to create a system backup file and to restore the system with that backup
file.
1. Insert a FAT32-formatted USB drive in the front-panel USB port.
2. Select
USB Backup/Restore
on the System menu.
Image 6–262 System: USB Backup/Restore selection
The system detects if a FAT32-formatted USB drive is in the front-panel USB port. If the system detects no
USB drive in the USB port, the top line of the USB Backup/Restore menu reads, “USB Detected – No.” If
the system detects a USB drive in the USB port, the top line of the USB Backup/Restore menu reads,
“USB Detected – Yes.”