beautypg.com

Power cord and line voltage selection – Barco PDS-4K HDMI Presentation Switcher User Manual

Page 21

background image

21

R5912621 /01 PDS–4K

Power cord and line voltage selection

The PDS–4K is rated to operate with the following specifications:

Input Power: 100-240 VAC, 50-60 Hz

Power Consumption: 2A maximum

The PDS– 4K performs line voltage selection automatically. No user controls are required. The AC power
cords must be accessible so that they can be removed during field servicing.

WARNING:

When used above 230 volts, a UL listed line cord rated for 250 volts at 15 amps must

be used and must conform to IEC-227 and IEC-245 standards. This cord will be fitted with a tandem
prong-type plug.
The rear panel ON/OFF switch does not disconnect the unit from input AC power. To facilitate
disconnection of AC power, the power cord must be connected to an accessible outlet near the unit.
Building Branch Circuit Protection: For 115 V use 20 A. For 230 V use 8 A.

General