Front panel setup: flash display – Barco PDS-4K HDMI Presentation Switcher User Manual
Page 145

145
R5912621 /01 PDS–4K
Image 6–235 Front Panel Setup: Display Brightness adjustment
3. Press the Adjust knob to select the desired brightness level.
Front Panel Setup: Flash Display
1. Scroll to and select
Flash Display
on the Front Panel Setup menu to choose between not flashing and
flashing the display screen.
Flash Display Off (not flashing) is the system default.
Image 6–236 Front Panel Setup: Flash Display selection
Once Flash Display is selected, the highlight bar turns from gray to cyan.