System: hdcp: mode and status – Barco PDS-4K HDMI Presentation Switcher User Manual
Page 152
R5912621 /01 PDS–4K
152
Image 6–250 System: HDCP selection
System: HDCP: Mode and Status
Mode and Status selections work in the same manner for outputs and for MVR output. Mode and
Status selections for inputs are slightly different. The procedure for PGM1 output is shown below.
For outputs and MVR output:
1. Scroll to and select
PGM1 Mode
on the HDCP menu.
Image 6–251 System: HDCP: Mode selection
Once PGM1 Mode is selected, the highlight bar turns from gray to cyan.
2. Use the Adjust knob to toggle between and select either
Off
or
On
.