Barco PDS-4K HDMI Presentation Switcher - Manual (Page 95)

95 R5912621 /01 PDS–4K
3. Press the Adjust knob to select the desired multiviewer format, when it is displayed.
Multiviewer: Auto Configure Output Format
Use Auto Configure Output Format to automatically detect and acquire multiviewer output format.
1. Scroll to and select Auto Configure Output Format on the Multiviewer menu.
Image 6–130 Multiviewer: Auto Configure Output Format selection
Multiviewer: Select Layout
Scroll to Select Layout and press the Adjust knob to activate the control.
1. Use Select Layout to change among the Multiviewer's four window layout "looks."
Image 6–131 Multiveiwer: Select Layout
2. Turn the Adjust knob to scroll through the four Layouts and press the Adjust knob again to apply the
change in order to see the new layout on the Multiviewer's output.
Menu orientation