System: ethernet – Barco PDS-4K HDMI Presentation Switcher User Manual
Page 155
155
R5912621 /01 PDS–4K
After HDMIInput1-1 Mode is selected, HDMIInput1-1 Status reflects the type of HDCP authentication with
the input device, if HDCP authentication is present. If no HDCP authentication is present, the HDMIInput1-
1 Status reads "N/A."
System: Ethernet
Use System: Ethernet to adjust the Ethernet parameters of the system. For example, the user can set up a
static IP or use DHCP (Dynamic Host Configuration Protocol).
1. Select
Ethernet
on the System menu.
Image 6–257 System: Ethernet selection
2. Scroll to and select the desired Ethernet parameter, for example
DHCP
.
Image 6–258 Ethernet: DHCP selection
Once Ethernet parameter is selected, the highlight bar for that parameter turns from gray to cyan.