Output: color/sample/bit – Barco PDS-4K HDMI Presentation Switcher User Manual
Page 87
87
R5912621 /01 PDS–4K
3. Use the Adjust knob to turn HDCP
On
or
Off
.
When HDCP is turned On the system displays the HDCP specification version for the primary output. This
is a status-only display; it cannot be selected or adjusted.
Select
Back
to return to the Output menu.
Output: Color/Sample/Bit
Use the Color/Sample/Bit menu to adjust the color space (RGB or YCbCr), sampling rate (4:4:4 – 4:2:2 –
4:2:0), and bit depth (8, 10, or 12) of the output signal.
1. Select
Color/Sample/Bit
on the Output menu.
Image 6–111 Output: Color/Sample/Bit selection
2. Scroll to and select the desired output (for example
HDMI1A
).
Image 6–112 Color/Sample/Bit: output (HDMI1A) selection
Once the output is selected, the highlight bar turns from gray to cyan.