Possible errors – Barco PDS-4K HDMI Presentation Switcher User Manual
Page 34
R5912621 /01 PDS–4K
34
Auto System Setup is the first submenu of the Setup Menu; it is already highlighted in gray.
2. Select
Auto System Setup
.
The system displays a warning message.
Image 6–4
3. Select
Yes
to begin the auto setup, or select
No
to return to the Setup Menu.
Auto System Setup performs two operations.
•
For every destination, the system reads the EDID of the display attached to the primary HDMI output
connector and applies the display’s preferred format as the format for the destination.
•
The system finds the destination with the highest output format and programs the HDMI (and optional
DisplayPort) inputs' EDID with that format.
Possible errors
The PDS-4K presentation switcher supports displays operating at 23.98 Hz, 24 Hz, 25 Hz, 30 Hz, 50 Hz,
59.94 Hz, and 60 Hz. If a connected HDMI display does not operate at 23.98 Hz, 24 Hz, 25 Hz, 30 Hz, 50 Hz,
59.94 Hz, or 60 Hz, or if no HDMI display is connected to an output, the system displays error messages.
Image 6–5 Sample error messages
In the setup that generated the sample error messages shown in
no video cables were connected
to the PDS-4K.