Barco PDS-4K HDMI Presentation Switcher - Manual (Page 179)

179 R5912621 /01 PDS–4K
Image 6–309 Reset menu tree
Factory reset
1. Press the adjust knob to select Reset .
Image 6–310 Reset menu: Factory Reset options
2. Select the type of reset to perform, for example, Factory: Full .
- Factory: Full restores all default system configurations and deletes all stored still images.
- Factory: Save IP, Dante restores all default system configurations, except that it saves the current IP
address and Dante settings. This option deletes all stored still images.
- Factory: Save IP, EDID, Dante restores all default system configurations, except that it saves the
current IP address, EDID settings, and Dante settings. This option deletes all stored still images.
- Soft performs a system reboot, while maintaining all previously saved system settings.
- Back returns to the Setup Menu.
The system displays a confirmation message, depending on which reset option was selected.
Menu orientation