HP BA322 90087 User Manual
Page 30
8) Execute DCL commands and procedures
9) Shut down this system
Enter CHOICE or ? for help: (1/2/3/4/5/6/7/8/9/?)
Review the following sections to understand how the menu works. Then you can choose
appropriate menu options when you are asked to do so before, during, and after an installation
or upgrade.
1.4.1 Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
Select option 1 on the operating system main menu to install, upgrade, or reconfigure your
OpenVMS software. Selecting option 1 implements a PCSI utility concept called a
. The
OpenVMS platform contains:
•
The OpenVMS operating system
•
, Common Data Security Architecture (
), HPBinarychecker, Secure Sockets
Layer (
), Performance Data Collector (
) (base), and
(base),
all of which are installed automatically with OpenVMS, and for OpenVMS Integrity servers
only, WBEM Services for OpenVMS, and WBEM Providers for OpenVMS.
•
The optional
,
, and
products
NOTE:
For use of Instant Capacity (
), Temporary Instant Capacity (
), (supported
on cell-based Integrity servers), and for support of such products as gWLM and HP Systems
Insight Manager (HP SIM), you must install TCP/IP Services for OpenVMS. SSL for OpenVMS
is required and is installed automatically.
Including the optional products in the OpenVMS platform allows you to install or upgrade these
products along with the OpenVMS operating system.
When you choose to upgrade the system disk, and the OpenVMS software on the disk is the
same version, you are given options to reinstall or to reconfigure the OpenVMS system or
reconfigure the OpenVMS platform.
Before installing or upgrading OpenVMS, see the information in the following chapters, as
appropriate:
•
Chapter 2: “Preparing to Install in an OpenVMS Cluster Environment” (page 41)
•
Chapter 3: “Installing the OpenVMS Operating System” (page 45)
•
Chapter 4: “Before Upgrading the OpenVMS Operating System” (page 83)
•
Chapter 5: “Preparing to Upgrade in an OpenVMS Cluster Environment” (page 95)
•
Chapter 6: “Upgrading the OpenVMS Operating System” (page 103)
NOTE:
Before installing or upgrading OpenVMS on a target drive in an OpenVMS Cluster,
make sure the target system disk is not mounted elsewhere in the cluster. The target system disk
must be dismounted clusterwide (except on the system from which the installation or upgrade
is being performed) and must remain so during the installation or upgrade.
When you select option 1 on the operating system main menu, the system asks whether you
want to preserve or initialize the system disk. The display is similar to the following:
There are two choices for Installation/Upgrade:
INITIALIZE - Removes all software and data files that were
previously on the target disk and installs OpenVMS I64.
PRESERVE -- Installs or upgrades OpenVMS I64 on the target disk
and retains all other contents of the target disk.
* Note: You cannot use PRESERVE to install OpenVMS I64 on a disk on
30
Getting Started