HP BA322 90087 User Manual
Page 121
HP I64VMS OPENVMS V8.3 Platform (product suite)
HP I64VMS VMS V8.3 Operating System
HP I64VMS OPENVMS V8.4: OPENVMS and related products Platform
HP I64VMS KERBEROS V3.1-152
Configure and set up Kerberos
If Kerberos will be run on this system, but has not been
used previously, you need to perform the following steps.
o Run the Kerberos configuration procedure:
@SYS$STARTUP:KRB$CONFIGURE.COM
o Add the following line to SYS$MANAGER:SYSTARTUP_VMS.COM:
$ @SYS$STARTUP:KRB$STARTUP
o Add the following line to SYS$MANAGER:SYLOGIN.COM:
$ @SYS$MANAGER:KRB$SYMBOLS
Press RETURN to continue:
6.4.7 Upgrade Creates and Validates Boot Options (Integrity servers only)
At this point in an OpenVMS Integrity servers upgrade, the procedure creates and validates boot
options if you chose to have the procedure do so (see
).
•
If you answered NO , the following message is displayed
If there is an existing boot option that was used to boot this
system disk, you may be able to use it. Otherwise, you will have
to use the EFI Shell the first time that you boot the newly
installed system. After booting, use the OpenVMS I64 Boot Manager
to create a Boot Option. To do this log in to a privileged
account and execute this command:
$ @SYS$MANAGER:BOOT_OPTIONS
The procedure then informs you that the upgrade is complete and prompts you to press
Return
(Enter) to continue, at which point it returns you to the OpenVMS main menu. You
can select option 8 (“Execute DCL commands and procedures”) on the OpenVMS main
menu and enter the command at the DCL triple dollar sign prompt ($$$) to start the
OpenVMS Integrity servers Boot Manager utility.
•
If you answered YES, the procedure determines whether a boot entry already exists for the
system disk (in this example, DKB400:):
— If an entry is found, a message similar to the following is displayed:
The EFI Boot Manager menu includes the following boot option(s)
for DKB400:
Validate EFI Boot Options list: Timeout = 0 secs.
----------------------------------------------------------------------
1 DKB400 PCI(0|20|1|0) Scsi(Pun1,Lun0) "OpenVMS on DKB400: PKA0.1"
----------------------------------------------------------------------
1 entries found.
In this example, one boot option is found. If multiple entries are found and if they are
all SCSI devices, the procedure displays the following message and then notifies you
that the upgrade is complete:
6.4 Completing the Upgrade
121