HP BA322 90087 - Manual (Page 195)

4. Enter P to configure the selected device as the Primary console. You then see the selected
device as the Primary console:
5. Press the Esc key to return to the previous menu. When prompted whether to save changes
to NVRAM, enter Y:
6. When prompted whether to reset the system, enter Y to make the changes take effect:
B.2.1.2 Using the EFI Shell to Select the OpenVMS Console
To select the device for your OpenVMS console using the EFI shell, follow these steps:
B.2 Selecting Your OpenVMS Console for the Integrity servers System 195