HP BA322 90087 User Manual

Page 231

The utility prompts you for the position you want your entry to take in the EFI boot option
list. Enter any position number other than 1. (The number 1 position sets the device for
automatic rebooting, which is not desirable for upgrades.)

Enter the desired position number (1,2,3,,,) of the entry.
To display the Boot Options list, enter "?" and press Return.
Position [1]: 4

The utility prompts you for OpenVMS boot flags. By default, no flags are set. Enter the
OpenVMS flags (for example, 0,1), or accept the default (NONE) to set no flags as in the
following example:

Enter the value for VMS_FLAGS in the form n,n.
VMS_FLAGS [NONE]:

If you are booting OpenVMS Integrity Version 8.4 onwards, HP recommends the value of
VMS_FLAGS be set to 0,200400.

The utility prompts you for the service name from OpenVMS Integrity servers Version 8.4
onwards if you have entered 0,200400 as the boot flags. The service name is mandatory.

INFOSERVER_SERVICE:

NOTE:

The service name entered must be in uppercase.

The utility asks whether the device will be used for cluster satellite booting. Answer NO as
in the following example:

Will EIA0 be used for cluster satellite boot? (Yes/No): NO

(For information about establishing a device for cluster satellite booting, see the HP OpenVMS
Cluster Systems manuals.)

The utility prompts you for a description to include with your boot option entry. By default,
the device name and MAC address is used as the description. You can enter more descriptive
information, as in the following example. As shown in the display of boot entries that follows,
the device name and MAC address (without dashes) are included anyway in the boot entry
line.

Enter a short description (do not include quotation marks).
Description ["EIA0"]: I64 UPGRADE VIA NET

efi$bcfg: eia0 (Boot0002) Option successfully added

Using the utility to display the devices at this point (selecting 2 on the main menu), you see
your device listed, as in the following example:

Enter your choice: 2

To display all entries in the Boot Options list, press Return.
To display specific entries, enter the entry number or device name.
(Enter "?" for a list of devices):

EFI Boot Options list: Timeout = 10 secs.
----------------------------------------------------------------------------
01. DKB0 PCI(0|20|1|1) Scsi(Pun0,Lun0) "Boot VMS from DKB0" OPT
02. DKB200 PCI(0|20|1|1) Scsi(Pun2,Lun0) "Boot VMS from DKB200" OPT
03. VenHw(d65a6b8c-71e5-4df0-d2f009a9) "EFI Shell [Built-in]"
04. EIA0 PCI(0|0|2|0) Mac(0013215b85e4) "I64 Upgrade VIA NET"
----------------------------------------------------------------------------
4 entries found.

Exit the utility by entering E at the prompt:

Enter your choice: E

C.2 Setting Up Your System as an InfoServer Client

231