KEPCO KLN Series (750W, 1500W, 3000W), Main Contro Firmware Version 1.70 and higher - Manual (Page 95)

KLN Series 051614
B-1
APPENDIX B - SCPI COMMAND/QUERY DEFINITIONS
B.1 INTRODUCTION
This appendix defines the SCPI subsystem commands and queries used with the KLN power sup-
ply. Subsystem commands are defined in PAR. B.3 through B.62. Table B-1 provides a quick refer-
ence of all SCPI subsystem commands and queries used in the KLN 750W.
B.2 NUMERICAL VALUES
Refers to integer
Refers to Floating (scientific notation: digits with decimal point and Exponent, e.g., 2.71E1 for 27.1.)
B.3 DISP:CONTrast COMMAND
DISP:CONT
Syntax: Short Form: DISP:CONT Long Form: DISPlay:CONTrast
Description: Sets the brightness of front panel Voltage and Current displays.
Argument: is a value in the range from 0 to 5.
Example: DISPlay:CONTrast 3 sets display contrast to level 3.
TABLE B-1. SCPI SUBSYSTEM COMMAND/QUERY INDEX
COMMAND PAR. COMMAND PAR.
DISP:CONT, ? B.3, B.4 SOUR:VOLT:LIM:LOW, ? B.34, B.35
FETC? B.5 SOUR:VOLT:PROT:LEV, ? B.36, B.37
MEAS:ADDR? B.6 SOUR:VOLT:PROT:TRIP? B.38
MEAS:CURR? B.7 SYST:BEEP, ? B.39, B.40
MEAS:VOLT? B.8 SYST:COMM:LAN:DHCP, ? B.41, B.42
OUTP, ? B.9, B.10 SYST:COMM:LAN:DNS, ? B.43, B.44
OUTP:PON, ? B.11, B.12 SYST:COMM:LAN:DNS:AUTO, ? B.45, B.46
OUTP:PROT:CLE B.13 SYST:COMM:LAN:GATE, ? B.47, B.48
SOUR:CURR, ? B.14, B.15 SYST:COMM:LAN:IP, ? B.49, B.50
SOUR:CURR:PROT:LEV, ? B.16, B.17 SYST:COMM:LAN:IPAD, ? B.51, B.52
SOUR:CURR:PROT:STAT, ? B.18, B.19 SYST:COMM:LAN:MAC? B.53
SOUR:CURR:PROT:TRIP? B.20 SYST:COMM:LAN:RES B.54
SOUR:LIST:DTIM, ? B.21, B.22 SYST:COMM:LAN:SMAS, ? B.55, B.56
SOUR:LIST:RTIM, ? B.23, B.24 SYST:COMM:LAN:TEL:PORT, ? B.57, B.58
SOUR:MEM:CLS B.25 SYST:ERR? B.59
SOUR:MEM:CURR:X, ? B.26, B.27 SYST:KLOC, ? B.60, B.61
SOUR:MEM:LIST:X? B.28 SYST:LOC B.62
SOUR:MEM:REC:X B.29 SYST:REM B.63
SOUR:MEM:VOLT:X, ? B.30, B.31 SYST:VERS? B.64
SOUR:VOLT, ? B.32, B.33
NOTE: Commands listed above that are followed by “, ?“ have a related query.