KEPCO KLN Series (750W, 1500W, 3000W), Main Contro Firmware Version 1.70 and higher - Manual (Page 104)

B-10
KLN Series 051614
B.50 SYSTem:COMMunicate:LAN:IP? QUERY
SYST:COMM:LAN:IP?
Syntax: Short Form: SYST:COMM:LAN:IP? Long Form: SYSTem:COMMunicate:LAN:IP?
Description: Indicates IP address assigned for communication vi the LAN interface.
Return Format:
Example: SYST:COMM:LAN:IP? returns 192.168.0.100 to indicate the IP address is set to 192.168.0.100.
B.51 SYSTem:COMMunicate:LAN:IPADdress COMMAND
SYST:COMM:LAN:IPAD
Syntax: Short Form: SYST:COMM:LAN:IPAD
Description: Sets the static IP address for communication via the LAN interface. Changing this address
requires that power to the KLN be cycled off, then on.
Argument:
Example: SYST:COMM:LAN:IPAD 192.168.0.100 sets the static IP address to 192.168.0.100.
B.52 SYSTem:COMMunicate:LAN:IPADdress? QUERY
SYST:COMM:LAN:IPAD?
Syntax: Short Form: SYST:COMM:LAN:IPAD? Long Form: SYSTem:COMMunicate:LAN:IPADdress?
Description: Indicates IP static address assigned for communication via the LAN interface.
Return Format:
Example: SYST:COMM:LAN:IPAD? returns 192.168.0.100 to indicate the static IP address is set to
192.168.0.100.
B.53 SYSTem:COMMunicate:LAN:MAC? QUERY
SYST:COMM:LAN:MAC?
Syntax: Short Form: SYST:COMM:LAN:MAC? Long Form: SYSTem:COMMunicate:LAN:MAC?
Description: Indicates MAC address assigned for communication via the LAN interface.
Return Format: is text in the format xx-xx-xx-xx-xx-xx.
Example: SYST:COMM:LAN:MAC? returns 70-62-42-00-00-00 to indicate the MAC address is set to 70-62-
42-00-00-00.
B.54 SYSTem:COMMunicate:LAN:RESet COMMAND
SYST:COMM:LAN:RES
Syntax: Short Form: SYST:COMM:LAN:RES
Long Form: SYSTem:COMMunicate:LAN:RESet
Description: Resets the LAN settings used for communication via the LAN interface to the factory
defaults. This includes the IP address and hostname, so LAN communications could be lost. Fac-
tory default LAN settings are: DHCP set to On and IP address set to 192.168.0.100
Argument: none
Example: SYST:COMM:LAN:RES resets LAN settings to factor defaults described above.
B.55 SYSTem:COMMunicate:LAN:SMAS COMMAND
SYST:COMM:LAN:SMAS
Syntax: Short Form: SYST:COMM:LAN:SMAS
Description: Sets the Subnet Mask address for communication via the LAN interface. Changing this
address requires that power to the KLN be cycled off, then on.
Argument:
Example: SYST:COMM:LAN:SMAS 255.255.0.0 sets the Subnet Mask address to 255.255.0.0.