Section 2 - installation, 1 unpacking and inspection, 2 terminations and controls – KEPCO KLN Series (750W, 1500W, 3000W), Main Contro Firmware Version 1.70 and higher User Manual

Page 27: Figure 2-1. kln 750w series rear panel, Figure 2-2. kln 1500w series rear panel, Figure 2-3. kln 3000w series rear panel, Unpacking and inspection -1, Terminations and controls -1, Kln 750w series rear panel -1, Kln 1500w series rear panel -1

KLN Series 051614

2-1

SECTION 2 - INSTALLATION

2.1

UNPACKING AND INSPECTION

This instrument has been thoroughly inspected and tested prior to packing and is ready for
operation. After careful unpacking, inspect for shipping damage before attempting to operate.
Perform the preliminary operational check as outlined in PAR. 2.3. If any indication of damage is
found, file an immediate claim with the responsible transport service.

2.2

TERMINATIONS AND CONTROLS

a) Front Panel: Refer to Figure 3-1 (750W), 3-2 (1500W) or 3-3 (3000W) and Table 3-1.

b) Rear Panel: Refer to Figure 2-1 (750W), 2-2 (1500W) or 2-3 (3000W) and Table 2-1.

FIGURE 2-1. KLN 750W SERIES REAR PANEL

FIGURE 2-2. KLN 1500W SERIES REAR PANEL

FIGURE 2-3. KLN 3000W SERIES REAR PANEL