KEPCO KLN Series (750W, 1500W, 3000W), Main Contro Firmware Version 1.70 and higher - Manual (Page 16)

1-6 KLN Series 051614
PHYSICAL CHARACTERISTICS - CONTINUED
Programming Control port 26-pin connector
SER IN port 2-position Euroblock (mating connector supplied)
Sense port 3-position Euroblock (mating connector supplied)
RS-485 port 3-position Euroblock (mating connector supplied)
LAN port (optional) RJ 45 connector
GPIB port (optional) Standard IEEE 488.2 GPIB connector
GENERAL (ENVIRONMENTAL) SPECIFICATIONS
Temperature Operating:
Storage:
0 to 50°C (indoor use)
-20 to 70°C
Humidity Operating:
Storage:
30%~90% RH (no condensation)
10%~90% RH (no condensation)
Altitude 3000m max
Cooling Speed-Controlled Fans
Noise <70 dB (A)
EMC Standard EN 61326-1:2006
EMC Emissions (EN 61326-1) Conducted Disturbance: EN 55011:2007 +A2:2007 Class B
Radiated Disturbance: EN 55011:2007 +A2:2007 Class B
Harmonic Distortion: EN 61000-3-2:2006 Class A
Voltage Fluctuations
and Flicker:
EN 61000-3-3:2008 Section 5
EMC Immunity (EN 61326-1) Electrostatic Discharge (ESD): EN 61000-4-2:2009 Class B
Radiated RF Magnetic Field: EN 61000-4-3:2006 + A1:2008 + A2:2010 Class A
Electrical Fast Transients and
Bursts:
EN 61000-4-4:2004 + A1:2010 Class B
Surge: EN 61000-4-5:2006 Class B
Conducted Disturbance
Induced by RF Fields:
EN 61000-4-6:2009, Class A
Voltage Dips and Short
Interruptions:
EN 61000-4-11:2004, Class C
Vibration Testing (1 hour) Frequency:
Acceleration:
PSD (Power Spectral Density:
Test Axis:
1Hz to 200Hz
1.146g rms
0.0001g
2
/Hz (1 Hz), 0.01g
2
/Hz (4 Hz, 100 Hz), 0.001g
2
/Hz
(200 Hz)
X/Y/-Z (10 mins.), +Z (30 mins.)
NOTE:
All specifications apply after power on for 30 minutes, ambient temperature: 23±5°C, Humidity: under 80% RH, AC Voltage: ±5%,
Frequency: ±5%.
TABLE 1-2. KLN GENERAL SPECIFICATIONS (CONTINUED)
SPECIFICATION RATING/DESCRIPTION